HP Procurve

Configuration

You can configure a RADIUS with following command:

SWITCH(config)# radius-server host 192.168.76.140 key PRESHAREDKEY
SWITCH(config)# aaa authentication port-access eap-radius
SWITCH(config)# aaa port-access authenticator active
SWITCH(config)# aaa port-access authenticator active

Configuring the Ports

On Aruba you are not configuring dot1x in the ports. Instead you define a List of Ports, which should use dot1x. e.g all Ports from 3 to 8:

SWITCH(config)#aaa port-access mac-based 3-8

Guest VLAN

SWITCH(config)#aaa port-access mac-based 3-8 unauth-vid 50

Periodic Re-Authentication

Force a hourly Re-Authentication:

SWITCH(config)#aaa port-access mac-based 3-8 reauth-period 3600

3600 seconds = once a hour